{"id":34979,"date":"2022-06-16T08:00:00","date_gmt":"2022-06-16T13:00:00","guid":{"rendered":"http:\/\/abeautifulmess.com\/?p=34979"},"modified":"2023-01-26T14:23:19","modified_gmt":"2023-01-26T20:23:19","slug":"reupholster-your-bed-frame-in-one-afternoon-with-a-no-sew-option-too","status":"publish","type":"post","link":"https:\/\/abeautifulmess.com\/reupholster-your-bed-frame-in-one-afternoon-with-a-no-sew-option-too\/","title":{"rendered":"Reupholster Your Bed Frame in One Afternoon (With a No-Sew Option Too)!"},"content":{"rendered":"\n

You may think that title sounds too good to be true, but it’s not! I had been eyeing a beautiful pink velvet bed<\/a> for a few months, but it was too expensive to ever actually pull the trigger on.<\/p>\n\n\n\n

We have a pretty small bedroom<\/a>, and having large dark pieces of furniture doesn’t help the room feel its largest\/brightest. But when a bed is fabric, you can’t just repaint it when you get tired of the color.<\/p>\n\n\n\n

So what’s a girl to do? Reupholster the bed frame!<\/p>\n\n\n\n

Related: <\/strong>How to Easily Fold a Fitted Sheet (With Video)<\/a><\/p>\n\n\n\n

r<\/strong><\/p>\n\n\n\n

\"\"<\/a><\/p>\n\n\n\n

\"\"<\/a>Isn’t that a crazy difference in just one day?! I’ll show you what I did with mine, and give you choices to do things the easier no-sew route if you would rather. Or, you can do 10 minutes of very basic sewing\u2014it’s up to you!<\/p>\n\n\n\n

Supplies:<\/strong>
–wide bolt upholstery<\/a> or multi-use fabric in your color of choice (wide enough to cover your headboard and be wrapped around the back, the blush fabric I chose was 54″ wide). I used about 5.5 yards for my bed.
–wide bolt white fabric<\/a> as an underlayment (optional but helpful if you have thin primary fabric and are going from a dark bed to a light bed)*
–electric staple gun<\/a> and 1\/2″ staples
–fabric scissors<\/a> and straight pins<\/a><\/p>\n\n\n\n

*NOW, BEFORE WE BEGIN<\/strong>, I’ll let you know that my bed took a little longer to cover than yours probably will because of two things: the fabric I liked best was on the thinner side and the bed I was covering was a super dark color.<\/p>\n\n\n\n

If I didn’t cover the bed in white fabric first, then the blush pink would look kind of dull because you’d be seeing some of the dark grey coming through, but by covering it in white first, you got the full blush color.<\/p>\n\n\n\n

If you aren’t going from a very dark bed to a very light colored bed OR if you have a thicker backed fabric like an upholstery grade fabric then you probably won’t need to do this step.<\/p>\n\n\n\n

Just lay your fabric choice over your bed frame and if you can’t see any of the color underneath coming through, then skip the white fabric step\u2014faster and cheaper!<\/p>\n\n\n\n

\"\"<\/a>OK! So, most fabric covered beds come in four pieces (headboard, two side rails, and a footer) that connect with some sort of hardware pieces like you see above.<\/p>\n\n\n\n

Most beds come apart like that because it’s both easier for the manufacturer to wrap the pieces individually, and who has a house with doors and hallways big enough to move a full-sized bed into rooms if it doesn’t come apart, right?<\/p>\n\n\n\n

You can also see above that the bed was originally covered with fabric and then stapled into place, and that’s basically what we are going to do too! <\/p>\n\n\n\n

\"\"<\/a>Once we had taken apart each of the rails (and removed that wooden spine part in the middle that holds the mattress up) we also took off the connecting hardware on each section, too. <\/p>\n\n\n\n

Make sure to label where each piece goes and what direction it faces so you can put it back together at the end.<\/p>\n\n\n\n

I also suggest jotting down a quick measurement of where the hardware is connected on each board so you can easily find that spot again if you end up covering that area with fabric. <\/p>\n\n\n\n

For example, 8″ in from the outside edge and 1\/2″ up from the bottom type of measurements. <\/p>\n\n\n\n

\"\"<\/a>I also unscrewed the legs from the header and footer and made a note of where those holes were located. <\/p>\n\n\n\n

Your legs may have a plate they attach to or just go directly into the wood, so remove the plate if there is one there. <\/p>\n\n\n\n

\"\"<\/a><\/p>\n\n\n\n

The Sewing Option<\/strong><\/h2>\n\n\n\n

I laid the headboard onto a section of my white fabric (with the right side of the fabric facing the headboard) that was big enough to wrap the headboard, and wrapped and pinned the fabric around the back. Be sure to get the fabric smooth and tight.<\/p>\n\n\n\n

The small section of sewing that I did was at the top corner of each side of the headboard. I smoothed out the fabric and pinned the corner together so that the sides came together nicely (like you see in the top two frames.) Repeat that smoothing and pinning with the opposite side.<\/p>\n\n\n\n

Next, I removed the pins that were holding the fabric on the headboard, removed the fabric from the headboard, and sewed down that line where the corner pins were and cut the excess.<\/p>\n\n\n\n

Then, I tried the cover back on the headboard to see how it fit and pinched and sewed a little more fabric if it didn’t fit very snugly. <\/p>\n\n\n\n

Once I had the fit right, I turned the fabric right side out and put it back on so that I had the nice sewn corner that you see in the last frame.
\"\"<\/a><\/p>\n\n\n\n

The No-Sew Option<\/strong><\/h2>\n\n\n\n

If you don’t want to be bothered by sewing, you can lay your headboard on your fabric (with the right side facing outwards) and wrap your corners like you would wrap a nice present<\/a> and staple in place!<\/p>\n\n\n\n

The above two photos are how I wrapped the bottom of the headboard, so the only difference is that you’ll want to make sure you have enough fabric length to have that open side (in the first picture) come all the way up and over the back. That way, you can staple it on the back where it won’t be seen at all.<\/p>\n\n\n\n

I did the quick sewing option at the top two corners of the headboard and the footboard to make them look extra clean, but I wrapped all the other edges like you see above. <\/p>\n\n\n\n

Just be constantly thinking about what edges will be seen and which will be hidden under the bed, etc., so you know which edges should be totally covered.<\/p>\n\n\n\n

And if you are using two<\/em> layers of fabric and<\/em> doing the new-sew option, I would layer the fabrics on top of each other with your main fabric on the bottom and the right side facing the floor. Then, wrap them around the corners at the same time rather than one at a time.<\/p>\n\n\n\n

Take care to smooth them really well before placing your headboard on top, but doing them together should give you a less bulky fold than if you did them separately.<\/p>\n\n\n\n

\"\"<\/a>Once your sides are wrapped and the fabric is smoothed and pinned to the back, use your staple gun<\/a> to secure your fabric in place on the back\/bottom of your headboard.<\/p>\n\n\n\n

You’ll want to staple into something hard rather than just an area of foam or something, so feel around for the wooden frame under your fabric and staple your fabric secure to that down each side.<\/p>\n\n\n\n

I like to start in the middle of each section and have one person smooth and hold the fabric tight while the other staples every 5-6″. Once you reach one end, go back to the middle and complete the other side.<\/p>\n\n\n\n

You may occasionally reach a spot that’s really hard wood where your staple gun doesn’t quite go all the way in and that’s OK. <\/p>\n\n\n\n

You can try another spot nearby or hammer your staple flat, and as long as most of it went in it will hold. Trim any excess fabric as needed.<\/p>\n\n\n\n

\"\"<\/a>Once I had my headboard wrapped and covering the white fabric, I repeated the process (with the pink fabric) of pinning the corners, sewing, and stapling the fabric in place. <\/p>\n\n\n\n

You’ll only have to do it once though if you don’t need the white underneath. <\/p>\n\n\n\n

\"\"<\/a>Here’s what the bottom side looks like from the back with both layers stapled!<\/p>\n\n\n\n

\"\"<\/a><\/p>\n\n\n\n

How Do I Put the Hardware Back On?<\/strong><\/h2>\n\n\n\n

To put the hardware back on, we poked around the spots where we knew the holes were (based on our measurements we took before taking them off) with a pin or an awl until we found the holes. Then, we drilled our screws back in to create holes in the fabric.<\/p>\n\n\n\n

It’s a little harder to find the holes with two layers of fabric, so we found the holes through one layer and put the screws in and took them out again. <\/p>\n\n\n\n

This made the holes easier to find (and mark on the second layer) so we could put the hardware back on over the top of the fabric. We used the same method for connecting the legs back on.<\/p>\n\n\n\n

\"\"<\/a>See? All ready to connect to the other pieces!<\/p>\n\n\n\n


\"\"<\/a>At this point, I just repeated the process of laying out fabric that was big enough for my section, wrapping each piece, and stapling it in place.<\/p>\n\n\n\n

I found it easier to do the two sides with both fabric layers at once since I was simply folding and stapling those corners. <\/p>\n\n\n\n

But then, I did the headboard and footboard with the white and pink layers separately since I was sewing those top corners and that kept the fabric smooth. <\/p>\n\n\n\n

\"\"<\/a>Tip: If you are using two layers of fabric, trim excess fabric off the underneath layer to get a cleaner, less bulky corner fold (like I did with the white fabric) above.<\/p>\n\n\n\n

\"\"<\/a><\/p>\n\n\n\n

What if the Staples Don’t Go Through the Fabric?<\/strong><\/h2>\n\n\n\n

If you come to a really hard spot in the wood where your staple gun can’t get through, you can use small nails to tack that section in place.<\/p>\n\n\n\n

\"\"<\/a>Once all your pieces are covered, reattach all your hardware and legs and put your new bed back together! <\/p>\n\n\n\n

Since the fabric made the bed a little thicker in some spots, it was helpful to leave the screws out about 1\/4″ when putting the hardware back on. That way, you could fit the pieces together more easily and then tighten the screws once the frame was back together again. <\/p>\n\n\n\n

Reattach the spine middle part of your bed and you’re ready for the mattress and covers!<\/p>\n\n\n\n

\"\"<\/a> \"\"<\/a><\/p>\n\n\n\n

Love this post? Learn how to make an upholstered headboard here<\/a>!<\/strong><\/h3>\n\n\n\n

\"\"<\/a> \"\"<\/a>I have to say, I felt pretty good about this project, but it came out so much better than I ever expected! I would be shocked if I saw this in someone else’s house and they told me they had recovered it.<\/p>\n\n\n\n

This simple method did remove the tufted look that the headboard had before, but I like it better that way since it looks more modern. <\/p>\n\n\n\n

If your headboard has tufts that you want to keep, use extra fabric to cover some buttons<\/a> in the new color, find the buttons under the fabric, and use a curved needle<\/a> to sew the buttons onto the top of the existing buttons for more of a tufted look.<\/p>\n\n\n\n

Overall, I love this before\/after and you could actually grab a staple remover in the future if you ever want to recover again in another color. Hope this DIY helps you give your bedroom a budget makeover, too!<\/p>\n\n\n\n

P.S. You can see how my bedroom finally came together<\/a> and the rest of my home tours<\/a> here<\/a>! xo. Laura<\/a><\/p>\n\n\n

<\/div>
\n
\n\n\t
\n\n\t\t
\n\n\t

Love this post? Sign up for our newsletter for more ideas!<\/p>\n<\/div>Join Now<\/a><\/span>\n<\/div>\n

\n\n\t
\n\n\t\t
\n\n\t\"\"\n<\/div>
\n\n\t

Get creative ideas for recipes, crafts, decor, and more in your inbox!<\/p>\n

\n